0

🐣Easter Sale Extravaganza!🌷50% OFF EVERYTHING* - No Code Needed.

 »  

Common Methods for Training Marijuana Plants

Grow Team
 | 
Last Updated: 
Common Methods For Training Marijuana Plants

Marijuana plant training is a common and effective way to increase yields and improve crop quality. It is a physical manipulation of the plant to encourage a specific growth pattern. There are various ways to train marijuana plants, each with its advantages and disadvantages. These training methods are classified into two broad categories, LST (Low-Stress Training) and HST (High-Stress Training).

Low-Stress Training (LST) Methods

The low-stressed training methods are mainly applied to young plants. These methods don’t put too much stress on the plant, hence the name. The low-stress training techniques include:

1. Super Cropping

Super cropping is a training technique that involves gently bending the plant’s stems to cause internal damage. This damage triggers the release of more auxins, hormones that promote growth. The increased auxin levels cause the plant to grow thicker stems and leaves. Super cropping is an easy way to increase yields without putting too much stress on the plant.

This method allows you to control the shape and size of your plant. You can bend the stems in any direction to make the plant grow horizontally or vertically. The best part about this method is that it doesn’t involve any cutting, so there is no risk of infection.

2. Snipping

Snipping is a training technique that involves cutting off the tips of the plant’s branches. This encourages the plant to grow sideways instead of upwards. By doing this, you can increase the number of flower sites and, as a result, the yield.

This method is often used in conjunction with topping (described below). The snipping method is best suited for plants that are already growing horizontally.

Although it is not as common as others, like super cropping, it is still an effective training technique for marijuana plants. There are many ways to do this, but cutting off the top 1/3 of the plant is the most common. This will encourage the plant to grow sideways and produce more buds.

3. Screen of Green (SCROG)

The screen of green is a training technique that involves using a screen to train the plant. The screen is placed over the top of the plant, and the branches are trained through the holes in the screen. This forces the plant to grow horizontally and increases the number of flower sites.

SCROG is an effective way to increase yields, but it requires a lot of work. The screen needs to be moved as the plant grows, and the branches need to be trained through the holes. This can be time-consuming, but the results are worth it.

4. No-Technique

The no-technique method is the simplest way to train your plant. It doesn’t involve any special techniques or equipment. Instead, let the plant grow naturally and bend it 90 degrees when it reaches the desired height. The best time to do that is when the plant is at the vegetative stage.

This method is the easiest way to train your plant, but it’s also the least effective. The plant will grow naturally and may not produce as many buds as other methods. However, this might be the best method for you if you are a newbie.

High-Stress Training (HST) Methods

High-stress training methods are more advanced and are usually applied to older plants. These methods are called high-stress because they put more stress on the plant. The high-stress training techniques include:

1. Topping

Topping is a training technique that involves cutting off the tips of the plant’s main stems. This encourages the plant to grow sideways instead of upwards. By doing this, you can increase the number of flower sites and, as a result, the yield.

Topping is best suited for plants that are already growing horizontally.

2. Fiming

FIMing is a training technique that involves cutting off the tips of the plant’s main stems. This encourages the plant to grow sideways instead of upwards. By doing this, you can increase the number of flower sites and, as a result, the yield.

FIMing is best suited for plants that are already growing horizontally.

3. Defoliation

Defoliation is a training technique involving removing some leaves from the plant. This encourages the plant to redirect its energy toward growing flowers and buds. Defoliation can be done by hand or with a machine.

Defoliation is a stressful technique, so it should only be done on already healthy plants. Otherwise, it could damage the plant.

4. Listing

listing is a training technique that involves gently bending the plant’s stems to cause internal damage. This damage triggers the release of more auxins, hormones that promote growth. The increased auxin levels cause the plant to grow thicker stems and leaves.

5. Manifolding

Manifold is a training technique that involves wrapping the plant’s stems around a support structure. This encourages the plant to grow horizontally instead of vertically. By doing this, you can increase the number of flower sites and, as a result, the yield. It is time-consuming, but it is worth it to improve your yield.

Choosing Between LST and HST

There are two main factors to consider when choosing between low-stress training (LST) and high-stress training (HST);

The age of the plant

Age is important because younger plants are more delicate and can be easily damaged. In addition, HST techniques like topping and FIMing can damage younger plants, so they should only be used on older plants.

The type of plant

The type of plant is also an essential factor to consider. Some plants are more resistant to stress than others. For example, indica plants are more resistant to stress than sativa plants. This means HST techniques can be used on indica plants without damaging them.

LST is generally better for younger plants, and HST is better for older plants. However, there are exceptions to this rule. For example, if you want to increase the yield of your plant, HST techniques like topping and manifold can be used on younger plants.

In Conclusion

There are many different ways to train your cannabis plants. The best method for you will depend on the age of your plant and the type of plant. As discussed above, LST is generally better for younger plants, and HST is better for older plants. However, there are exceptions to this rule. For example, if you want to increase the yield of your plant, HST techniques like topping and manifold can be used on younger plants.

Leave a Comment

Item added to cart.
0 items - $0.00